Plasma Gel Maker - Heating and Cooling Block for 1-5 mL Syringes - 10-90 °C - Dual Bins

The Master Science Plasma Gel Maker heats and then cools plasma in syringes to turn it into a gel, using a controlled heating and cooling system. It has two independent bins, one for heating and one for cooling, each holding syringes from 1 to 5 mL and each with its own timer.

Heating from room temperature to 90 °C takes under 10 minutes and cooling back from 90 °C takes under 4 minutes. Two pre-loaded programs start with one key, and an alarm sounds when the run finishes.

Technical Specifications

Specifications of the Master Science Plasma Gel Maker:

• Brand: Master Science
• Model Number: MSDBI-GM5SWISS
• SKU: MSDBI-GM5SWISS
• Brand: Master Science
• Model Number: MSDBI-GM5SWISS
• SKU: MSDBI-GM5SWISS
• Capacity: 1 to 5 mL syringes, 10 positions (heating or cooling)
• Bins: Separate heating and cooling bins, independently timed
• Temperature Range: 10 to 90 °C
• Control Accuracy: ±1 °C
• Setting Step / Display: 1 °C / 0.1 °C
• Safety Cut-out: 110 °C
• Timer: 0 s to 99 min 59 s, 1 s steps; timing starts at set temperature
• Heating Time: RT to 90 °C in < 10 min
• Cooling Time: 90 °C to RT in < 4 min
• Operation: Timed or continuous
• Programs: 2 pre-loaded
• Display: Dual LED (temperature and time)
• Power: 260 W
• Power Supply: AC 110 or 220 V, 50/60 Hz
• Ambient Conditions: 5 to 40 °C, 80 % RH
• Dimensions (L × W × H): 330 × 220 × 130 mm
• Net / Gross Weight: 4.2 kg / 5.5 kg

Key Benefits

• Heat and cool in one unit: the Master Science Plasma Gel Maker has two independent bins.
• Fast process: under 10 min heating and under 4 min cooling.
• One-key operation: two stored programs.
• Accurate timing: timer starts once the set temperature is reached.
• Safe: 110 °C cut-out and end-of-run alarm.

For general sample heating, see Master Science dry baths and laboratory instruments.

Product Features

Thermal

• 10 to 90 °C
• Built-in cooling system
• ±1 °C control

Capacity

• 1 to 5 mL syringes
• 10 positions
• Two independent bins

Control

• Dual LED display
• Two preset programs
• End-of-run alarm

Applications

The Master Science Plasma Gel Maker is used for:

• Preparing plasma gel in syringes
• Medical aesthetic clinics
• Heating and cooling of syringe samples
• Timed thermal treatment at up to 90 °C

Common Problems and How This Gel Maker Helps

How the Master Science Plasma Gel Maker simplifies plasma gel preparation:

• Separate devices for heating and cooling: both bins in one unit.
• Waiting for gels to cool: active cooling under 4 minutes.
• Inconsistent timing: automatic timer start at temperature.
• Overheating risk: 110 °C safety cut-out.