Dry Bath Incubator - Heating and Cooling Block Heater - -10 to 100 °C - Interchangeable Blocks

The Master Science Dry Bath Incubator holds tubes in high-purity aluminium blocks instead of water, giving clean, accurate temperature control for sample storage and reactions, DNA amplification steps, electrophoresis denaturation and serum coagulation.

Two versions are offered: DBI-100 heats from 5 °C above room temperature to 100 °C, and DBI-R100 also cools down to 30 °C below room temperature and can hold samples at 4 °C. Interchangeable blocks fit tubes from 0.2 mL to 50 mL and plates.

Technical Specifications

Specifications of the Master Science Dry Bath Incubator (DBI-100 / DBI-R100):

• Brand: Master Science
• Model Number: MSDBI-100SWISS, MSDBI-R100SWISS
• SKU: MSDBI-100SWISS, MSDBI-R100SWISS
• Brand: Master Science
• Model Numbers: MSDBI-100SWISS, MSDBI-R100SWISS
• SKU: MSDBI-100SWISS, MSDBI-R100SWISS
• Function: Heating (100); heating and cooling (R100)
• Temperature Setting: 0 to 100 °C / -10 to 100 °C
• Temperature Control: RT +5 °C to 100 °C / RT -30 °C to 100 °C
• Accuracy / Uniformity: ≤ ±0.3 °C / ≤ ±0.3 °C
• Display Resolution: 0.1 °C
• Heating Time: ≤ 12 min (25 to 100 °C)
• Cooling Time (R100): ≤ 10 min (100 to 25 °C); ≤ 25 min (RT to RT -30 °C)
• 4 °C Storage: R100 only
• Timer: 1 min to 99 h 59 min, or continuous
• Programs: Up to 5 steps, up to 99 cycles, auto run and resume
• Protection: Fault detection with alarm, over-temperature protection, calibration function
• Power: 150 W
• Power Supply: AC 110 or 220 V (100); AC 100 to 240 V (R100), 50/60 Hz
• Dimensions: 260 × 195 × 150 mm
• Weight: 2.5 kg / 4.5 kg

Key Benefits

• No water to change: the Master Science Dry Bath Incubator uses aluminium blocks.
• Heating and cooling: R100 cools to 30 °C below room temperature.
• Fits many tubes: blocks from 0.2 to 50 mL.
• Programmable: 5-step profiles with up to 99 cycles.
• Safe: fault alarm and over-temperature cut-out.

For heating with shaking, see the Master Science thermo shaker dry bath.

Product Features

Temperature

• ±0.3 °C accuracy
• Heating to 100 °C
• Cooling and 4 °C hold (R100)

Blocks

• High-purity aluminium
• Easy to swap and clean
• 0.2 mL to 50 mL tubes

Control

• LCD display
• Multi-step programs
• Auto resume after power loss

Applications

The Master Science Dry Bath Incubator is used for:

• Sample storage and reactions
• DNA amplification steps
• Electrophoresis sample denaturation
• Serum coagulation
• General sample heating and cooling

Optional Accessories

• Blocks: 96 × 0.2 mL; 54 × 0.5 mL; 35 × 1.5 mL; 35 × 2.0 mL; 15 × 0.5 + 20 × 1.5 mL
• Blocks: 96-well ELISA plate; 24 × 5 mL; 15 × 10 mL; 12 × 15 mL; 6 × 50 mL

Common Laboratory Problems and How This Dry Bath Helps

How the Master Science Dry Bath Incubator improves sample heating:

• Contamination from water baths: dry aluminium blocks.
• Samples needing cold holding: R100 cooling and 4 °C storage.
• Different tube sizes: interchangeable blocks.
• Unattended failures: fault alarm.