Deionized Water Purifier - RO and DI Lab Water System - 10-30 L/h - 16 MΩ·cm

The Master Science Deionized Water Purifier turns ordinary tap water into two grades of laboratory water: RO pure water with TDS below 10 ppm, and deionized water with resistivity of 10 to 16 MΩ·cm at 25 °C. Both are drawn from separate outlets, ready to use.

Three output sizes are available, 10, 20 and 30 L per hour, each supplied with an external 12 L pressure tank. The system can replace single, double or triple distilled water stills.

Technical Specifications

Specifications of the Master Science Deionized Water Purifier range (M10 / M20 / M30):

• Brand: Master Science
• Model Number: MSLWP-F5-M10SWISS, MSLWP-F5-M20SWISS, MSLWP-F5-M30SWISS
• SKU: MSLWP-F5-M10SWISS, MSLWP-F5-M20SWISS, MSLWP-F5-M30SWISS
• Brand: Master Science
• Model Numbers: MSLWP-F5-M10SWISS, MSLWP-F5-M20SWISS, MSLWP-F5-M30SWISS
• SKU: MSLWP-F5-M10SWISS, MSLWP-F5-M20SWISS, MSLWP-F5-M30SWISS
• Feed Water: Tap water, 0.15 to 0.5 MPa, 5 to 40 °C
• Production Capacity: 10 / 20 / 30 L/h
• Dispense Flow: 1.5 to 2 L/min (with pressure tank)
• RO Water: Salt rejection 95 to 99 %, TDS < 10 ppm
• Deionized Water: 10 to 16 MΩ·cm at 25 °C, conductivity ≤ 0.1 µS/cm
• Purification Stages: 5 µm PP, granular activated carbon, RO membrane, deionization column
• Outlets: 2 (RO water and deionized water)
• Monitoring: Online water quality and pressure monitoring
• Power Supply: 220 V, 50 Hz, 48 W
• Dimensions (W × D × H): 410 × 270 × 500 mm
• Package Dimensions: 640 × 560 × 700 mm

Key Benefits

• Two water grades from one unit: the Master Science Deionized Water Purifier supplies RO and DI water.
• Replaces water stills: no boiling and lower running cost.
• Automatic operation: RO flushing, tank filling and stop on low feed water.
• Tool-free filter change: quick-connect cartridges, front and back doors.
• Safer design: electrics separated from the water path.

For higher purity, see the Master Science laboratory instrument range.

Product Features

Purification

• 5 µm PP pre-filter
• Activated carbon
• RO membrane and DI column

Automation

• Anti-scaling RO flush
• Auto stop when tank is full
• Auto stop on tap water failure

Service

• Quick-connect filter cartridges
• Front and rear access doors
• Portable TDS pen supplied

Applications

Water from the Master Science Deionized Water Purifier is used for:

• Feed water for ultra-pure water systems
• Biochemical analysers and reagent preparation
• Microbial culture media and buffers
• Stability chambers, hydrogen generators and salt spray testers
• Electroplating, battery and chip washing

Standard Accessories Included

• Purifier with one set of filter cartridges
• External 12 L pressure tank
• Accessory kit
• Portable TDS pen

Common Laboratory Problems and How This Purifier Helps

How the Master Science Deionized Water Purifier solves lab water problems:

• Slow, energy-hungry distillation: RO and DI purification on demand.
• Unknown water quality: online monitoring.
• Scaling of RO membranes: automatic flushing.
• Difficult filter replacement: quick-connect cartridges.